How to prepare a piece of furniture for painting with Fusion Mineral Paint: step-by-step guide

That piece of furniture you've been looking at for months thinking, "It's missing something"... today, we're giving it a second life. With Fusion Mineral Paint, transforming a piece of furniture isn't just about painting - it's about restoring the character it deserves. And the good news: it's easier than you think.

Here, we'll tell you exactly how to do it, step by step, without complications.

✦ Before you start: preparation is everything

The difference between a mediocre result and one you'll love lies in how you prepare the surface. Don't skip this step - we promise.

• Clean thoroughly: Use degreaser or soapy water. No grease, no dust, no excuses. Let it dry thoroughly.
• Sand gently: Use 150-220 grit, just to break the shine. There's no need to sand down to bare wood.
• Repair anything that needs attention: Dents, cracks, scratches - wood filler, sand, and you're done.
• Primer? Fusion has incredible adhesion, so in most cases you don't need it. It's only worth adding on highly lacquered or glossy surfaces.

✦ The magic: painting with Fusion Mineral Paint

This is where the transformation begins. Fusion Mineral Paint is a forgiving paint that provides great coverage and beautiful matte finishes. Here's how to do it:

• First coat, thin and even - use a brush or foam roller. Don't overload it.
• Wait 1-2 hours and apply the second coat. You'll see the color come to life.
• Want a distressed effect? Lightly sand between coats to create that vintage look everyone loves.
• Dark colors over light: you may need a third coat. Patience - the result is worth it.

✦ The finishing touch: protect it so it lasts

One of the things we love most about Fusion is that it has a built-in sealer in the paint itself. For many pieces of furniture, you don't need anything else. But if the piece will get heavy use - a table, a chair, a countertop - add a protective layer from our Fusion Mineral Paint Essentials collection:

• Fusion Wax: a soft, silky finish with that wonderfully smooth feel.
• Fusion Top Coat: for high-traffic surfaces that need maximum durability.

Apply with a soft cloth using circular motions and let it cure for 24-48 hours before using it. Full curing takes 21 days - during that time, treat it with a little extra care.

✦ Little secrets that make all the difference

• Work between 15°C and 25°C - extreme cold and heat are not friends of paint.
• Ventilate the space well while you work.
• Clean your brushes with water and soap as soon as you finish - Fusion is water-based and cleans up easily if you don't let it dry.
• Above all: enjoy the process. Each coat is one step closer to the piece of furniture you imagined.

Do you have questions or want to tell us about your project? Write to us - we love seeing the transformations you create with our products. 🖤